Trusted German Design Manufactured for North America
Newton Group Ltd. manufactures and constructs a modular Building System for above grade parking structures. Our CANADACAR Parking Structure System is an engineered and prefabricated building system that utilizes the most advanced and innovative techniques of construction resulting in long span and column-free parking bays. This durable and cost-effective design has been used across Europe for over 25 years.
Less expensive to construct than poured in place concrete and other precast options.
Maintenance costs are 90% lower than conventional parking structures.
Can be constructed in less time compared to poured in place.
Does not have interior support columns, providing safety and security for the users.
An innovative design incorporates concrete floor panels that are thinner than conventional decks. This means that fewer resources are needed during production than a conventional parking structure, and the design can fit in more levels.
Completely customizable to suit the footprint of your project.
Many different façade options are available to tie the structure in with the surroundings.
How is it Different?
The CANADACAR system uses prefabrication to provide cost savings, schedule savings, and a better-quality end result.
The system uses hot-dipped galvanized steel columns and beams to support a specialized precast concrete panel. The steel and precast form a composite beam allowing for a column free span.
One of the major differences is in the reduced maintenance costs. Typical parking structures require a topping membrane over the entire drive area to prevent salts and water from penetrating the concrete and causing issues with the rebar. This membrane typically needs to be stripped and replaced every 5-6 years. This incurs the cost to replace it, but will also require the garage to be out of service while doing so. The CANADACAR System only requires this topping on the joints between panels, which equates to roughly 7-10% of drive surface area. This is possible due to the special concrete mix design used by Newton Group to create the precast panels. This results in roughly 90% less maintenance cost compared to a typical parking structure.
Both the steel fabrication and precast concrete manufacturing occurs in Newton Group’s facilities at their head office in Guelph Ontario.
Prefabrication allows Newton Group to have full control of the production schedule and to adapt and react to changes that may occur throughout construction. The systematic manufacturing process is completed indoors with constant working conditions leading to consistent quality and dimensional accuracy.
Newton Group is not only the manufacturer of these components, but is a full General Contractor who will deliver the a complete Turn-Key project (Design, Engineering, Foundations, Electrical, Mechanical, Facade, etc.).
Newton Group has just invested in expanding their production facility with automated equipment coming from Germany to better supply their Building System methodology.
The Parking Solution
The CANADACAR Parking Structure Building System is perfect for:
Colleges and Universities have the ability to "buy back" their own land by consolidating their vast parking lots into one central location by building a parking structure. This will free up developable land to allow the campus to grow. This is exactly what was done at The University of Windsor and Humber College.
Use the slider below to see the growth potential for your campus!
Similar to the Campuses above, Hospitals and Health Centres are typically situated in areas of the city where they have become land-locked due to the growth of the residential areas that surround the campus. In order for the hospital to grow it can either look at satellite locations or they can "buy back" their own land which is being used for surface parking lots. By consolidating all of the parking into one location with multiple levels, the hospital can now expand on its' current property. The parking structure can be located in a central location with pedestrian bridges connecting to main buildings. It also offers covered parking which is safe and secure. Check out the CANADACAR CPTED Brochure below to see how user comfort and safety is inherent in the Building System design.
The CANADACAR Building System is ideal for inventory storage or employee parking for Auto Dealerships. The column free open spans allow for natural light to enter into building and maintains clear line-of-sight throughout each parking bay. The more cars that you can store on your property the more inventory you can turnover in a given year.
Storing your inventory inside a structure protects the vehicles from vandals and adverse weather, while also protecting customers who want to look around on a rainy day.
As a General Contractor, Newton Group Ltd. can manage the entire process including the preliminary items such as:
Zoning and Setback Determination
Site Surveying and Topography
Geotechnical and Soil Reports
Site Plan Design for Site Plan Approval
Contact us today about how Newton Group can increase your inventory turnover. Contact us.
Parking around busy airports is always a premium. A conveniently located parking structure can alleviate travelers anxiety about finding a parking space and making it to their gate on time. When they return they know that their vehicle is safely parked in a secure parking structure protected from the elements.
Contact us today about how Newton Group can provide safe and efficient parking for your airport operation. Contact us.
Municipal and Commercial
Whether a parking structure is meant for public or private uses, the CANADACAR Parking Structure Building System can be adapted to include whatever the project requires. Elevators, bike storage, parking inventory counters, ground floor retail or other commercial spaces, the system is designed with enough flexibility to meet the needs of your project.
Contact us today about how Newton Group can meet all of the requirements of your parking project. Contact us.
Download More Information
CANADACAR CPTED Brochure
CPTED: Crime Prevention Through Environmental Design.
At the core of the CANADACAR Parking Structure System lies the
principles of CPTED design. The typical parking structure has been
reimagined and reconfigured to promote the utmost standards
of safety for drivers and pedestrians.